|
|
System with RC Model Servos
Kutěj, Jaromír ; Nosko, Svetozár (referee) ; Musil, Martin (advisor)
This thesis addresses the design of a movable RC model with a use of servo motors. It describes both the analysis of suitable hardware and a realization of the project with an emphasis on microcomputer controlled devices and technologies communication technologies with said devices. Furthermore, an interaction a interfacing with user is discussed. Based on findings a system is then implemented in form of a model of a car built atop of microcomputer, controlled wirelessly using a mobile application. This system is then enhanced by proximity sensors that prevent collisions by halting movement of the car.
|
|
|
Robotic Manipulator Controlling Using Microcontroller
Zemánek, Martin ; Škarvada, Jaroslav (referee) ; Růžička, Richard (advisor)
This master's thesis deals with control robotic manipulator ROB 1-3 using common joystick and microcontroller HC08 NITRON or HC08 LJ12. The goal of this work was creation of module for controlling axes position of servos included in robot by analog signal coming from connected joystick. There are formed possible suggestions about connecting individual parts together for both autonomous and version using development kit. Programming code suggestion is based on these connections during further development. The limitations of using it are described in analysis and final results are shown in statistics results.
|
|
|
Automation of RC Models Control
Vávra, Jan ; Musil, Petr (referee) ; Zemčík, Pavel (advisor)
This thesis is about controlling RC model with microcontroller ESP-32 through WiFi enabled mobile device with OS Android. Goal of this thesis is to make controlling RC model easier and more fun. Parts of this thesis are dealing with using pulse width modulation to control servos, creating a user interface and making a protocol for comunication between RC model and mobile device. Result of this work is application on OS Android, which sends instructions on microcomputer, that controls steering servo and elecromotor. System has predefined stunts on microcomputer and operator has a choice of defining custom stunt in application, which is send to microcomputer in series of individual instructions.
|
|
|
Microprocessor system for robot controll
Novotný, Peter ; Beran, Jan (referee) ; Macho, Tomáš (advisor)
This thesis deals with the control of industrial manipulator model by a microprocessor system. The first part is devoted to familiarization with the problem of controlling manipulators and servos. The second part contains description of mechanical construction, and design of microprocessor system and electronics needed for communication with PC and servos control. The last part of thesis consists of the microprocessor software.
|
|
|
System with Model Servos
Švec, Radek ; Materna, Zdeněk (referee) ; Zemčík, Pavel (advisor)
The aim of this thesis was to study the ways of controlling hobby servos, and then to design and create small machine with hobby servos. The created machine is a six-legged walking robot - hexapod with 18 servos for movement. This robot can be remotely controlled using a mobile application for Android. Main control unit of the robot is ESP32 development board. The resulting hexapod is able to walk in all directions and rotate on spot with different walking gaits. It can also change its ground clearance and walking speed. The result of this thesis is a compact walking robot with basic functions, which is suitable for extensions, eg. adding a camera or measuring sensors.
|
|
|
System with Model Servos
Jablonický, Jaroslav ; Nosko, Svetozár (referee) ; Zemčík, Pavel (advisor)
This work is focused on exploring how to control modeling servos by computers. It will also serve as an overview or a guide for beginners. The work includes the design of a simple robot, more precisely it is a simple robotic hand, but in particular it contains control designs from different platforms using different means. Finally, there are recommendations for each platform.
|
|
|
Robotic arm control
Pochlopeň, Timotej ; Petyovský, Petr (referee) ; Macho, Tomáš (advisor)
This thesis deals with microprocessor system, which be intended for control of robotic arm by RC servos. The first part includes familiarization with the problems of controlling the robot. The second part contains proposal of microcontroller and electronics necessary for communication with personal computer and creating scheme and printed circuit board. The last part of this work is devoted to software of microcontroller.
|
|
|
Controlling of a Robotic Car by FITkit and Camera
Čech, Martin ; Orság, Filip (referee) ; Rozman, Jaroslav (advisor)
Object of this thesis is to design and create programs allowing autonomous controlling of Ackerman type mobile robotic car by using camera, sampling-based algorithms and FITkit. Thesis discuss theoretical principles of image processing and object recognition, sampling-based algorithms particularly RRT and pulse width modulation principles.
|
|
|
System with Servos Controlled by Microcomputer
Veselý, Miroslav ; Kolář, Martin (referee) ; Zemčík, Pavel (advisor)
The goal of this bachelor thesis was to investigate possibilities of controlling RC servos by amicrocomputer. A part of this thesis was creation of a device for purpose of browsing distant surfaceby a laser. The created device is based on Arduino platform and it is possible to control this deviceremotely by a computer application.
|
|
|
RF-controlled model car
Hradiský, Marek ; Pavlík, Michal (referee) ; Šteffan, Pavel (advisor)
The aim of this bachelor’s thesis is design and practica lrealization of remote- controlled car by the computer. This thesis describes concept of the system selection and description of the components. The practical part contains software implementation for computer also for microcontroller and the concept of printed circuit board for the controller.
|
guest ::
